Polling rate is how many times per second your mouse reports its position to the PC: 1000 Hz means a report every 1 ms, 4000 Hz every 0.25 ms, 8000 Hz every 0.125 ms. 1000 Hz is the most common among pros (77%). Higher rates give smoother, slightly more responsive input, but only help if your DPI, monitor and PC can keep up.
Polling rates pros use
- 1000 Hz77% (706)
- 4000 Hz10% (88)
- 2000 Hz8% (70)
- 8000 Hz4% (32)
- 500 Hz2% (15)
- 100 Hz0% (2)
High polling rates need enough DPI
A report can only contain movement if the sensor counted some. At low DPI and slow, precise movements, a 4000–8000 Hz mouse sends many empty reports, which can make motion less smooth instead of more. Raising DPI fills more reports with real data. Our polling rate checker warns below 1600 DPI at 4000 Hz or more and below 800 DPI at 2000 Hz.
Match it to your monitor and PC
- The checker treats a polling rate below twice your monitor's refresh rate as a bottleneck; 1000 Hz is fine for 144–360 Hz monitors.
- At 4000–8000 Hz the CPU processes far more input events. On a weaker CPU this can cost frames or cause stutter; if you notice either, step down to 2000 or 1000 Hz.
- Wireless mice at high polling rates use more battery.
Which polling rate should you use?
| Setup | Suggested rate |
|---|---|
| 60–144 Hz monitor or older CPU | 1000 Hz |
| 240 Hz monitor, modern CPU | 1000–2000 Hz |
| 360 Hz+ monitor, modern CPU, 1600+ DPI | 4000 Hz (8000 Hz if stable) |
Frequently asked questions
What polling rate should I use for CS2?
1000 Hz works for almost everyone. Go to 2000–4000 Hz with a fast monitor, a modern CPU and at least 800–1600 DPI.
Is 8000 Hz worth it?
Only with a high refresh rate monitor, a strong CPU and high DPI. Otherwise the gain is negligible and it can cause stutter.
Does polling rate change my sensitivity?
No. Polling rate changes how often movement is reported, not how far the crosshair moves.
